ENTRANCE MAT PLANNING INFORMATION

Unless surface mounted, it is recomended that our entrance mats should always be in a matwell frame that is fitted flush with the floor.

For all 'Top Clean' mats for entrance areas, always indicate the profile length and the direction in which people will walk over the mat.

When ordering a system frame with mat or drainage tray with mat, please state the external frame size. We deduct approx. 10 mm from this for the exact mat size.

If you already have an angle frame, please indicate the clear inside dimensions of the frame. We will deduct approx. 5 mm from this to calculate the production size for your mat.

For large entrance areas, mats with a profile length of more than 300 cm and/or a weight of more than 50 kg should be divided, as they will otherwise be too bulky or too heavy for installation and maintenance.

When installing angle frames or wells in outdoor areas, drainage should be provided so that water can drain away (e.g. by making an opening in the screed), or the mat well should be connected to the GEGGUS 'Dirt Collection Tray' drainage system.

For surface mounted systems, our Top Clean TREND® mat in 10 and 17-mm versions can be equipped with a ramped edge so that a well is not required for any subsequent relaying.

For entrance areas with heavy traffic (for example, in airports, supermarkets, shopping centres etc.) we recommend our aluminium profile mats Top Clean STABIL, Top Clean OBJEKT and Top Clean HIGH, all of which meet the special footfall, weight-bearing and durability requirements of these locations

For special designs we recommend a weather-resistant and durable PVC template.

If you are providing a template, please always roll it and never fold it. The upper side of the template and the walking direction must be clearly marked on it. Only with these exact specifications can a dimensionally accurate entrance mat be made.